Focusrite OctoPre MKII
Alternatieven:Goedkoper of Duurder/BeterOm ook te bekijken: Eventuele goedkopere en andere/betere/beste alternatieven
Aanbieding: €699.00
-- Korting:17%
Op voorraad Direct Leverbaar
XLservice
Officiele Merk Garantie
2 jaar garantie
4350+ Afhaallocaties in Nederland
2300+ Afhaalpunten in Belgie
€579.00
Niet Leverbaar -> Bekijk alternatief
Niet Leverbaar -> Bekijk alternatief Op voorraad Direct Leverbaar XLservice Officiele Merk Garantie 2 jaar garantie 4350+ Afhaallocaties in Nederland 2300+ Afhaalpunten in Belgie
Omschrijving
De nieuwe OctoPre MKII is met 8x Focusrite mic pre-amp, 8x line-out en 16x ADAT Dual lightpipe output (8 channels at 96kHz) een krachtige i/o extensie voor iedere audio workstation en studio setup, analoge en digitale mixers en harddisk recorders. Het apparaat biedt flexibele routing mogelijkheden, -10dB pad op alle kanalen, 2 instrument kanalen, fantoom voeding voor het aansluiten van Magneto PurpleStudio Microfoon, LED metering, word-clock in en JettPLL jitter technologie op de ADAT outputs. OctoPre MKII is de ideale input aanvulling op de bijvoorbeeld de Saffire PRO40 of de SCARLETT 18i6 USB geluidskaart.
OctoPre MKII Details
Mic Input
Frequency Response: 20Hz - 20kHz +/- 0.1 dB.
THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter).
Noise: EIN > 125dB (128dB analogue to digital): measured at ~60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter).
Mic Gain: +10dB to + 55 dB
Input Pad: ~-10 dB
Phantom power switched in 2 x 4 channel groups (1-4 and 5-8)
Maximum input level: +8 dBu (+17 dBu with pad on input)
Line Input
Frequency Response: 20Hz - 20kHz +/- 0.1dB.
THD+N: < 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter).
Noise: -90dBu (22Hz/22kHz bandpass filter).
Line 1-8 Gain: -10 dB to +36 dB
Line maximum input level: +22 dBu
Instrument Input
Frequency Response: 20Hz - 20kHz +/- 0.1dB.
THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter).
Noise: -87dBu (20Hz/22kHz bandpass filter).
Instrument Gain: +10 dB to +55 dB
Maximum input level: +8 dBu
Analogue Output
Frequency Response: 20Hz – 20kHz +/- 0.2dB.
THD+N < 0.0010% (-100dB) (measured with 0dBFS input 22Hz/22kHz bandpass filter, un-weighted).
Nominal output level @ 0dBFS: 16 dBu, balanced
Digital
A/D Dynamic Range 110dB 'A-weighted' (all inputs).
JetPLL Technology providing superb jitter reduction for class leading converter performance.
Clock Jitter < 250 pico seconds.
Sample Rate Clock Accuracy: +/- 20PPM.
Sample rates: 44.1kHz to 96kHz.
Clock Sources: Internal and Word Clock.
Weight
3.6 kg / 7.93 lbs
Dimensions
W = 484mm / 19”, H = 45mm / 1.8”, D = 265mm / 10.4”
FRONT AND REAR CONNECTIVITY
Analogue Channel Inputs:
2x Mic / Line / Instrument inputs on the front panel (Instrument selected via front panel button)
6x Mic / Line inputs on the rear panel. Switches automatically between Mic (XLR) and Line (TRS)
Analogue Channel Outputs:
8x Balanced 1/4" TRS Jack on the rear panel
Digital Channel Outputs:
2x ADAT Lightpipe (TOSLINK) outputs. Provides 8 channels per port (16 total) at 44.1 and 48kHz. Provide 4 channels per port (8 total) at 88.2 and 96kHz (S-MUX).
*Note that when running at 44.1 or 48kHz, the digital outputs are mirrored, providing outputs 1 - 8 on both ports.
Front Panel Indicators:
8x Five segment input LED meters (-42, -18, -6, -3 and 0dBFS)
4x Sample Rate LED's (44.1k, 48k, 88.2k and 96k)
2x Sync Source LED's (Internal and Word Clock)
'Lock' indicator LED
Frequency Response: 20Hz - 20kHz +/- 0.1 dB.
THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter).
Noise: EIN > 125dB (128dB analogue to digital): measured at ~60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter).
Mic Gain: +10dB to + 55 dB
Input Pad: ~-10 dB
Phantom power switched in 2 x 4 channel groups (1-4 and 5-8)
Maximum input level: +8 dBu (+17 dBu with pad on input)
Line Input
Frequency Response: 20Hz - 20kHz +/- 0.1dB.
THD+N: < 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter).
Noise: -90dBu (22Hz/22kHz bandpass filter).
Line 1-8 Gain: -10 dB to +36 dB
Line maximum input level: +22 dBu
Instrument Input
Frequency Response: 20Hz - 20kHz +/- 0.1dB.
THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter).
Noise: -87dBu (20Hz/22kHz bandpass filter).
Instrument Gain: +10 dB to +55 dB
Maximum input level: +8 dBu
Analogue Output
Frequency Response: 20Hz – 20kHz +/- 0.2dB.
THD+N < 0.0010% (-100dB) (measured with 0dBFS input 22Hz/22kHz bandpass filter, un-weighted).
Nominal output level @ 0dBFS: 16 dBu, balanced
Digital
A/D Dynamic Range 110dB 'A-weighted' (all inputs).
JetPLL Technology providing superb jitter reduction for class leading converter performance.
Clock Jitter < 250 pico seconds.
Sample Rate Clock Accuracy: +/- 20PPM.
Sample rates: 44.1kHz to 96kHz.
Clock Sources: Internal and Word Clock.
Weight
3.6 kg / 7.93 lbs
Dimensions
W = 484mm / 19”, H = 45mm / 1.8”, D = 265mm / 10.4”
FRONT AND REAR CONNECTIVITY
Analogue Channel Inputs:
2x Mic / Line / Instrument inputs on the front panel (Instrument selected via front panel button)
6x Mic / Line inputs on the rear panel. Switches automatically between Mic (XLR) and Line (TRS)
Analogue Channel Outputs:
8x Balanced 1/4" TRS Jack on the rear panel
Digital Channel Outputs:
2x ADAT Lightpipe (TOSLINK) outputs. Provides 8 channels per port (16 total) at 44.1 and 48kHz. Provide 4 channels per port (8 total) at 88.2 and 96kHz (S-MUX).
*Note that when running at 44.1 or 48kHz, the digital outputs are mirrored, providing outputs 1 - 8 on both ports.
Front Panel Indicators:
8x Five segment input LED meters (-42, -18, -6, -3 and 0dBFS)
4x Sample Rate LED's (44.1k, 48k, 88.2k and 96k)
2x Sync Source LED's (Internal and Word Clock)
'Lock' indicator LED
Reviews, Tests en Opmerkingen
Snel geleverd, goede service. - Job, Haarlem
Bedankt voor de zeer snelle en duidelijke telefonische hulp. Zeer tevreden - Jolien
Fijn om advies van echte experts te krijgen - mvr Hermans
Studio gear zoals de OctoPre MKII
Professioneel advies van XLmusic.nl Experts? Stel een vraag
